Legacy 7

The Legacy 7 is a series of 7 files (17, 20, 25, 30, 35, 40, and 45 tip sizes) available in .04 and .06 tapers.

In stock
SKU
L7

Unit Price: $25.95

Part Number Length (mm) Material Taper Tip Subtotal Qty
300000 21 CM NiTi 04 17 $0.00
300001 21 CM NiTi 04 20 $0.00
300002 21 CM NiTi 04 25 $0.00
300003 21 CM NiTi 04 30 $0.00
300004 21 CM NiTi 04 35 $0.00
300005 21 CM NiTi 04 40 $0.00
300006 21 CM NiTi 04 45 $0.00
300007 21 CM NiTi 06 17 $0.00
300008 21 CM NiTi 06 20 $0.00
300009 21 CM NiTi 06 25 $0.00
300010 21 CM NiTi 06 30 $0.00
300011 21 CM NiTi 06 35 $0.00
300012 21 CM NiTi 06 40 $0.00
300013 21 CM NiTi 06 45 $0.00
300014 25 CM NiTi 04 17 $0.00
300015 25 CM NiTi 04 20 $0.00
300016 25 CM NiTi 04 25 $0.00
300017 25 CM NiTi 04 30 $0.00
300018 25 CM NiTi 04 35 $0.00
300019 25 CM NiTi 04 40 $0.00
300020 25 CM NiTi 04 45 $0.00
300021 25 CM NiTi 06 17 $0.00
300022 25 CM NiTi 06 20 $0.00
300023 25 CM NiTi 06 25 $0.00
300024 25 CM NiTi 06 30 $0.00
300025 25 CM NiTi 06 35 $0.00
300026 25 CM NiTi 06 40 $0.00
300027 25 CM NiTi 06 45 $0.00
300028 31 CM NiTi 04 17 $0.00
300029 31 CM NiTi 04 20 $0.00
300030 31 CM NiTi 04 25 $0.00
300031 31 CM NiTi 04 30 $0.00
300032 31 CM NiTi 04 35 $0.00
300033 31 CM NiTi 04 40 $0.00
300034 31 CM NiTi 04 45 $0.00
300035 31 CM NiTi 06 17 $0.00
300036 31 CM NiTi 06 20 $0.00
300037 31 CM NiTi 06 25 $0.00
300038 31 CM NiTi 06 30 $0.00
300039 31 CM NiTi 06 35 $0.00
300040 31 CM NiTi 06 40 $0.00
300041 31 CM NiTi 06 45 $0.00
reset

The Legacy 7 is a series of 7 files (17, 20, 25, 30, 35, 40, and 45 tip sizes) available in .04 and .06 tapers. The patented Controlled Memory process developed by D&S Dental allows the Legacy 7 series to reach maximum flexibility and ensure a safe and effective use. This series is available in 21mm, 25mm, and 31mm working lengths. These instruments are used with familiar techniques and sequences that are comparable to other products on the market.

Compare to: EdgeFile-X7™

Write Your Own Review
You're reviewing:Legacy 7